CNC Machine Tool Probe » machining centres

Three-Dimensional Shape Inspection Software – 3DSI

marposs — Fri, 27 Jun 2008 08:01:40 +0000

Machine Tool Line: 3D Shape Inspector (3DSI)

APPLICATION three dimensional shape inspection software

MACHINE machining centres, milling machines

PURPOSE shape verification, mold verification, part inspection, form verification, 3D checks, three dimensional checks

TECHNOLOGY touch probe, radio transmission, optical transmission, software

To know more log on to the Three-Dimensional Shape Inspection Software page

OP32 – Compact Optical Probing System

marposs — Fri, 21 Mar 2008 17:00:41 +0000

OP32 is the new MIDA compact probing system (Ø=32mm, L=54mm) with optical transmission, designed for CNC micro-milling machines, machining centres and generally for all small machine tools.

In OP32 the probe is integrated in the transmitter module and measurement data is transmitted to the CNC via a receiver and an interface.

MAIN TECHNICAL FEATURES:

Optical transmission angle: 360 degrees at 90 degree angle to spindle
Transmission distance: 2m
Dimensions: Ø=32mm L=54mm
Weight: 107g (with batteries)
Battery life (SR44 model):
- Stand-by time: 410 days
- Continuous running time: 90 h
- 5% use: 64 days.
Repeatability (2): 2 sigma = 1 µm
Overtravel with 35mm stylus:
- X,Y 8 mm
- Z 3 mm
Protection rating (IEC 60529): IP67.

In you are interested on knowing more, here it is the link: OP32 – Compact Optical Probing System

Machine Tool Line T18 – TS30

marposs — Wed, 28 Nov 2007 17:38:57 +0000

Touch Probes for Tool Setting on Machining Centres and Milling Machines

High performance MIDA touch probes for tool setting on CNC machining centers and milling machines. Reduced scrap, shorter cycle and set-up times and improved product quality are just some of the benefits to be gained.

To know more log on to: Touch Probes for Tool Setting on Machining Centres and Milling Machines

Probing System with Optical Transmission for CNC Machining Center and CNC Milling Machine

marposs — Wed, 01 Nov 2006 23:15:55 +0000

optical transmission for touch probes

E83 optical transmission system for Marposs Mida probes is designed to meet application needs for workpiece inspection on machining centres and milling machines.
It is composed of a transmitter, receiver and interface unit. The probe status is sent from the transmitter using an infrared signal to the receiver. This signal is decoded by the interface unit into a suitable form to be processed by the machine tool CNC.

Here the complete information about E83 optical transmission system for Marposs Mida probes