CNC Machine Tool Probe

OP32 is the new MIDA compact probing system (Ø=32mm, L=54mm) with optical transmission, designed for CNC micro-milling machines, machining centres and generally for all small machine tools.

In OP32 the probe is integrated in the transmitter module and measurement data is transmitted to the CNC via a receiver and an interface.

MAIN TECHNICAL FEATURES:

• Optical transmission angle: 360 degrees at 90 degree angle to spindle
• Transmission distance: 2m
• Dimensions: Ø=32mm L=54mm
• Weight: 107g (with batteries)
• Battery life (SR44 model):
  • Stand-by time: 410 days
  • Continuous running time: 90 h
  • 5% use: 64 days.
• Repeatability (2): 2 sigma = 1 µm
• Overtravel with 35mm stylus:
  • X,Y 8 mm
  • Z 3 mm
• Protection rating (IEC 60529): IP67.

In you are interested on knowing more, here it is the link: OP32 - Compact Optical Probing System

Line of Probing Systems for Machine Tools

The modular Mida‚Ñ¢ system is Marposs solution for verification and dimensional checks of parts and tools and for continuous process monitoring on CNC machine tools.

To simplify new machine installations and retrofitting, Mida‚Ñ¢ probes are compatible with most current mechanical and electronic interface standards and offer a selection of hard wired and non contact communications options.

Mida‚Ñ¢technology is also available for non contact measurement on milling machines and machining centers using the Mida‚Ñ¢ Laser system.

Mida‚Ñ¢ monitoring systems give the possibility to continuously check working process by means of a wide range of sensors on board.

All the components of the Mida‚Ñ¢Line are designed to resist the most severe working conditions in the machine tool environment, whilst at the same time being capable of guaranteeing maximum precision.

To fulfill any application needs, Mida‚Ñ¢ offers a wide and varied probing line

To know more log on to the: Line of Probing Systems for Machine Tools

Mida E86N spindle probing system, with radio-frequency transmission, is designed for presetting and workpiece measurement on milling machines and small and large machining centers. Thanks to the 64 available transmission channels, a very high number of machines equipped with radio frequency spindle probes, can be located even in a small machining area.

The Transmitter, available also in a compact version (E86N-P) suitable for all the applications on small-size machines and turning centers, can be activated and deactivated through a radio signal, allowing to extend the transmitter battery life and to be more user friendly.

The Interface, through two push buttons and one display, allows the programming of the whole system and the visualisation of all settings, of the transmission channel and of the charge level of the transmitter battery.

The receiving Antenna is particularly sturdy and suitable for standing also the harshest machine conditions. A sealed connector fitted between its base and the cable for connection to the interface facilitates its installation and any possible maintenance or replacement intervention.

These features make it very simple to perform all the installation, programming and maintenance operations on the E86N system. Moreover, thanks to the use of innovative technical solutions, the measurement accuracy and repeatability levels of 0.5 micron are guaranteed and other features such as insensitivity to vibrations and sharp accelerations in machine, and protection from chips and jets of coolant were improved.

Follow the link Radio Frequency Spindle Probing System for Machine Tools to know more.

Probing System with Radio Frequency Transmission for 5 axis CNC Machining Centers and Milling Machines

To know more about the: Machine Tool Line E86

Mida E83 TXL50 optical transmission system for lathes is designed to meet application needs for workpiece inspection on lathe and turning centre. The very compact transmitter dimensions enable its use also on machines with restricted working area and small tool holders.

The exceptional performances of the optical transmitter such as transmission distance, battery life, resistance to hot chips and pressure coolant, grant the use of Mida touch probes even in the harshest environment obtaining high production quality.

To know more log on to: Probing System with Optical Transmission for CNC Lathes and Turning Centers

E83 optical transmission system for Marposs Mida probes, is designed to meet application needs for workpiece inspection on machining centres and milling machines.
It is composed of a transmitter, receiver and interface unit. The probe status is sent from the transmitter using an infrared signal to the receiver. This signal is decoded by the interface unit into a suitable form to be processed by the machine tool CNC.

Here the complete information about E83 optical transmission system for Marposs Mida probes