CNC Machine Tool Probe » probing system

OP32 – Compact Optical Probing System

marposs — Fri, 21 Mar 2008 17:00:41 +0000

OP32 is the new MIDA compact probing system (Ø=32mm, L=54mm) with optical transmission, designed for CNC micro-milling machines, machining centres and generally for all small machine tools.

In OP32 the probe is integrated in the transmitter module and measurement data is transmitted to the CNC via a receiver and an interface.

MAIN TECHNICAL FEATURES:

Optical transmission angle: 360 degrees at 90 degree angle to spindle
Transmission distance: 2m
Dimensions: Ø=32mm L=54mm
Weight: 107g (with batteries)
Battery life (SR44 model):
- Stand-by time: 410 days
- Continuous running time: 90 h
- 5% use: 64 days.
Repeatability (2): 2 sigma = 1 µm
Overtravel with 35mm stylus:
- X,Y 8 mm
- Z 3 mm
Protection rating (IEC 60529): IP67.

In you are interested on knowing more, here it is the link: OP32 – Compact Optical Probing System

Probing Systems for Machine Tools

marposs — Thu, 09 Aug 2007 23:22:34 +0000

Line of Probing Systems for Machine Tools

The modular Mida system is Marposs solution for verification and dimensional checks of parts and tools and for continuous process monitoring on CNC machine tools.

To simplify new machine installations and retrofitting, Mida probes are compatible with most current mechanical and electronic interface standards and offer a selection of hard wired and non contact communications options.

Mida technology is also available for non contact measurement on milling machines and machining centers using the Mida Laser system.

Mida monitoring systems give the possibility to continuously check working process by means of a wide range of sensors on board.

All the components of the Mida Line are designed to resist the most severe working conditions in the machine tool environment, whilst at the same time being capable of guaranteeing maximum precision.

To fulfill any application needs, Mida offers a wide and varied probing line

To know more log on to the: Line of Probing Systems for Machine Tools

Radio Frequency Spindle Probing System for Machine Tools

marposs — Wed, 25 Apr 2007 21:59:53 +0000

Mida E86N spindle probing system, with radio-frequency transmission, is designed for presetting and workpiece measurement on milling machines and small and large machining centers. Thanks to the 64 available transmission channels, a very high number of machines equipped with radio frequency spindle probes, can be located even in a small machining area.

The Transmitter, available also in a compact version (E86N-P) suitable for all the applications on small-size machines and turning centers, can be activated and deactivated through a radio signal, allowing to extend the transmitter battery life and to be more user friendly.

The Interface, through two push buttons and one display, allows the programming of the whole system and the visualisation of all settings, of the transmission channel and of the charge level of the transmitter battery.

The receiving Antenna is particularly sturdy and suitable for standing also the harshest machine conditions. A sealed connector fitted between its base and the cable for connection to the interface facilitates its installation and any possible maintenance or replacement intervention.

These features make it very simple to perform all the installation, programming and maintenance operations on the E86N system. Moreover, thanks to the use of innovative technical solutions, the measurement accuracy and repeatability levels of 0.5 micron are guaranteed and other features such as insensitivity to vibrations and sharp accelerations in machine, and protection from chips and jets of coolant were improved.

Follow the link Radio Frequency Spindle Probing System for Machine Tools to know more.

Machine Tool Line: E86

marposs — Wed, 11 Apr 2007 09:01:11 +0000

Probing System with Radio Frequency Transmission for 5 axis CNC Machining Centers and Milling Machines

To know more about the: Machine Tool Line E86

Radio Frequency Spindle Probing System for Machine Tools

Probing System with Optical Transmission for CNC Machining Center and CNC Milling Machine

marposs — Wed, 01 Nov 2006 23:15:55 +0000

optical transmission for touch probes

E83 optical transmission system for Marposs Mida probes is designed to meet application needs for workpiece inspection on machining centres and milling machines.
It is composed of a transmitter, receiver and interface unit. The probe status is sent from the transmitter using an infrared signal to the receiver. This signal is decoded by the interface unit into a suitable form to be processed by the machine tool CNC.

Here the complete information about E83 optical transmission system for Marposs Mida probes